- Posts: 1230
- Thank you received: 0
Dynafits are Fustrating: The sequal!
- Marcus
-
- User
-
I was under the impression that the "Van Halen" causes some serious wear and tear on the bindings (inner bushings?) and was therefore great for rando racing (or sponsored skiers), but not recommended for everyday usage. Anyone else hear this?
The bushing wear and tear is only if you're using brakes -- the upward force from the brakes as the binding rotates wears out the bushing in the heelpiece. If you think about the mechanics of it, the "Van Halen" is the same motion/wear that releasing from the heelpiece in a fall would be.
Please Log in or Create an account to join the conversation.
- Scotsman
-
Topic Author
- User
-
- Posts: 2432
- Thank you received: 0
I also find Fritchis suck as compared to Dynafits from a skiing perspective. Dynafits paired with a reasonable boot provide fantastic edge control (again lateral rigidity), whereas the lateral slop inherent to Fritchis provide a sensation of skiing on lunch trays in comparison. (For those with both setups, try skiing back to back GS turns on hardpack with each binding; its a night and day difference between the two).
OK, I'm feeling a little better now that I've got that off my chest (and I also know this isn't at all responding to your original post above...). I just felt the need to rant and was too drugged up to respond to your initial Dynafit string from last season!
BTW, I've got some used Freerides w/crampons I'll sell real cheap...
Thanks for the different perspective and I'm interested in your experience. My main gripes have always been about the problems I have with Dynafits regarding touring and transitions and I've never really thought about the difference when skiing.
I'm not a good enough skier to notice much difference in them when skiing but have used both extensively in the resort. Can't say I have ever had any release problems with Fritischis but your post is thought provoking. I have never really trusted my Dynafits regarding pre-release and have got into the habit on powder days on locking down my toes ( very dangerous, I know) as I'm scared of losing a ski as my brakes do not always engage on the Dynafits upon release.
However, personal experience is everything and your comments very valid. Thanks
Please Log in or Create an account to join the conversation.
- lordhedgie
-
- User
-
- Posts: 187
- Thank you received: 0
However, after the first experience of chasing down a ski that got lost in trees (and ended up in a tree well), I've got leashes on my Dynafits. If that bothers you, I've suggest powder cords as a compromise, at least on soft snow. On hard snow, they just make it easier to see the ski slide away...
Please Log in or Create an account to join the conversation.
- Stugie
-
- User
-
- Posts: 291
- Thank you received: 0
I just picked up a new pair of the Naxo's, which have been reviewed in comparison with the Freerides (and for those of you who knew of my OTHER setup - this is a very good thing!!
Curious if anyone has any input on the Naxo's...or better yet a comparison with the Freerides - since my roommate just picked up the Freerides!
Please Log in or Create an account to join the conversation.
- NickD
-
- User
-
- Posts: 61
- Thank you received: 0
I adhere to the canadian guide rules of no leash whatsoever. Discussed in various threads in various forums. Never used the brakes as have noticed with others mostly problems and not much utility. Have considered the powder cord suggested above.
I have a pair of Naxos on R:EX's which are primary lift use due to their weight and touring unfriendliness. Having skied with numerous Fritschi companions, I did not want any part of those. The dynafits ski much better (boot lower to the ski) and are easier to deal with once you have some time with them. And less things to break (and I break almost everything--wore out a toepiece).
Let me know if you want to ski together with the "best bindings".
Please Log in or Create an account to join the conversation.
- Don_B
-
- User
-
- Posts: 99
- Thank you received: 0
Please Log in or Create an account to join the conversation.