FS: Volkl VTA 88

cfm
Topic Author
User

2 years 2 months ago #236450 by cfm

FS: Volkl VTA 88 was created by cfm

'20-'21 Volkl VTA 88 Lite with latest version of Xenic 10 bindings. Great spring ski. Skied approx. four times, lioke new. 180cm length, DPS Phantom Permanent Glide applied when new. Mounted for 30.0 boots, but will adjust from aprox. 300-335 BSL. $400

Please Log in or Create an account to join the conversation.

kamtron
User

2 years 2 months ago - 2 years 2 months ago #236451 by kamtron

Replied by kamtron on topic FS: Volkl VTA 88

Screaming deal, but seems like the heel mount is outside of the spec?
This shows mounting area width from 26.2-54.2 mm:
earnyourturns.com/32672/review-volkls-vta88/
This shows heel width of 28.5 mm, or only around 1 mm per screw within the reinforced mounting area:
skimo.co/tech-binding-hole-patterns

Last edit: 2 years 2 months ago by kamtron.

Please Log in or Create an account to join the conversation.

cfm
Topic Author
User

2 years 2 months ago #236452 by cfm

Replied by cfm on topic FS: Volkl VTA 88

At 28.5 it's within the mounting area as stated. I've mounted dozens of pairs of skis, including several with this same mounting zone. With the proper drill size, tap, epoxy or shoe goo, a person would tear their knee apart before pulling these out of the skis.

Please Log in or Create an account to join the conversation.