Need Dynafit Comfort info

Thanks Greg. Just learned that the screws were sent and that the silver ones are for the toe and the black are for the heel. Anyone know the correct drill size? I've always just eyeballed the diameter of the width of the screw without the threads and added a bit of epoxy.

Most people say 4.1mm for skis with metal in the topsheet and 3.6mm for skis without.  Nice to tap the holes before putting the screws in, too, though you can just run a screw in and out first before mounting the bindings.

tognar.com/binding_tools_boot_canting_glue_ski_snowboard.html

PS  Somtimes all the screws are black, but the heel ones have a thicker head to accomodate the thicker baseplate

I knew it! Dyna-fites ski in jeans.

That kid in the backpack skied the east face of McClellan Butte from the summit in his Dynafits.
I was just out for a quick moonlight XC tour and didn't bother to put on my stitched crease, polyester stretch pants.